AX-8000 PowerSense™ Series
Modular Multiport InLine Power Hubs

Scroll down to view Features, Specifications and Ordering Information

Safely and efficiently provide Power over Ethernet (PoE) Data cabling for VoIP phones, Wireless Networking access points, security cameras and other remote access devices.

The PowerSense™ Hub Family includes 20 slot and 10 slot modular chassis units which may be populated with any combination of PowerSense™ modules. The individual modules are all hot swappable and fully voltage isolated from each other. These units help reduce Total Cost of Ownership by allowing individual modules to be removed or inserted hot while the chassis and all other modules remain operational.

Mix and match modules for support of CDP™ devices, IEEE 48 volt, 24 volt or 12 volt applications within the same chassis. Power IP Phones, Wireless access points, Security cameras and other low voltage devices safely and efficiently with PowerSense™. A single port model is also available in any of the module styles for single device powering applications.

Features/Benefits:

• Individual power modules, hot swappable in the 19" rackmount ready chassis, use 1 per powered device
  
  
• Each module is current limited for short circuit protection with power isolation of 1KV between ports for safety
  
  
• Each module has user replaceable fuses for recovery from power surge or lightning damage, quickly repair any module
  
  
• Each module auto-detects the power requirement and offers transparent 10/100Mb and management operations
  
  
• Each module has FOUR diagnostic LED's - as shown above
  
  
• Mix and match modules for compatiblity with IEEE 802.3af or legacy Cisco CDP™ powered devices, 24 Volt Protocol or 12 Volt Protocol
  
  
• Standard or High Wattage modules available

Click here to view the product details of AX-8858-01 and AX-8858-02

Specifications:
Certifications
Safety:	UL 1950 and cUL
Emissions:	FCC Class A EN55022 Class A EN55024, CE Mark (CISPR 22 Class A)
Standards:	P802. 3af/D3.0 (Nov. 2001), 802.3u
Interfaces
20 Female RJ-45 Data ports 20 Female RJ45 Data+Power on Ethernet (PoE-Power over Ethernet) ports	Shielded jacks for Category 5 or greater UTP (two pair wire) or 100-ohm STP (two pair wire). Distance: 100 meters
Electrical: AC Power Input with removable power cord (IEC plug)
Input Voltage:	90-264V Autoranging (46Hz - 63Hz)
Connector:	3-pin with Ground
Chassis Grounding :	Yes
Power Supply:	Single
Electrical: DC Port Power Output
Power Enabling:	IEEE: IEEE 802.3af Cisco: Cisco Detection protocol - Cisco CDP™ 24V: Proprietary, 12 Volt: Proprietary
Power pins:	Unused pairs, pins 4,5(+), 7,8(-)
Max. Power/Port:	15.4W
Max Power-all ports active:	20*15.4W = 308W
Port to Port isolation:	1000V RMS
Overload protection :	if current reaches 400-450mA for 300-400 milliseconds, then the port shuts down
Physical/ Mechanical AX-8220 Chassis
Chassis type :	19" Rackmount w/20 Modules
Chassis size :	19"W x 14"D x 3.5"H
Module Type :	Removable, hot swappable
Weight:	20lbs. (9kg) with 20 modules installed
Physical/ Environmental
Operating Temperature	0° to 40° C ( 32° to 105° F)
Storage Temperature	-10° to 60° C ( 14° to 140° F)
Relative Humidity	10% to 90% non-condensing
Operating Altitude	-1,000 to 10,000 feet
LED Indicators/Module
LED Indicators/Module	Detect (Green) Fuse blown (Yellow) Power from Chassis (Green) Power forwarding (Power Out) (Green)

AX-8000 Ordering Information
Model AX-8000	8000 Series PowerSense Product Descriptions
Chassis only - without Modules
AX-8220	20 Slot PowerSense™ Chassis - 19" Rack Mount Ready
AX-8210	10 Slot PowerSense™ Chassis - with rubber feet
AX-8210-RM	10 Slot PowerSense™ Chassis - 19" Rack Mount Kit
AX-8210-WM	10 Slot PowerSense™ Chassis - Wall Mount Kit
Chassis - Complete with 20 Standard Power Chassis Modules
AX-8320	20 Power & Data Modules - 12 volt protocol
AX-8420	20 Power & Data Modules - 24 volt protocol
AX-8520	20 Power & Data Modules - IEEE 802.3af compatible
AX-8620	20 Power & Data Modules - Cisco CDP™ protocol
Chassis - Complete with 10 Standard Power Chassis Modules
AX-8310	10 Power & Data Modules - 12 volt protocol
AX-8410	10 Power & Data Modules - 24 volt protocol
AX-8510	10 Power & Data Modules - IEEE 802.3af compatible
AX-8610	10 Power & Data Modules - Cisco CDP™ protocol
Chassis Modules - Standard Power - for Devices up to 15.4 watts, uses 1 slot
AX-8300	Power & Data Module, 12 volt protocol
AX-8400	Power & Data Module, 24 volt protocol
AX-8500	Power & Data Module, IEEE 802.3af compatible
AX-8600	Power & Data Module, Cisco CDP™ protocol
Chassis Modules - High Wattage - for Devices up to 20 watts, uses 2 slots
AX-8300HW	Double Wide Power & Data Module, 12 volt protocol
AX-8500HW	Double Wide Power & Data Module, IEEE 802.3af compatible
AX-8600HW	Double Wide Power & Data Module, Cisco CDP™ protocol
Chassis Modules - Custom Power for specific products
AX-8400SP400101	Module, Supports Smarteye Cameras
AX-8400M58305AP	Module, Supports Trango Braodband AP up to 50 meter cable length
AX-8400IQEYE3	Module, Supports IQinvision IQEYE3 camera
AX-8400MXD03	Module, Supports Mobotix MX-D-03 camera
AX-8300IVC100	Module, Suppports IndigoVision camera
AX-8300AXIS205	Module, Supports AXIS Model 205 camera
AX-8300AXIS2120	Module, Supports AXIS Model 2120 camera
AX-8300SNCRZ30N	Module, Supports SONY SNCRZ30N camera
AX-8300SR600101	Module, Supports Savi Products
AX-8400MTR2400S	Module, Supports Motorola Canopy wireless APs, System Controller
Chassis - Cover Plates for unused slots
AX-8201	Single Slot cover plate
AX-8202	Two Slot cover plate
AX-8205	Five Slot cover plate
AX-8206	Six Slot cover plate
Data & Power Splitting Y cables for 12 volt applications RJ45 female/male and male power pin. Plug size/applications below:
AX-820Y-01	2.5mm plug for AXIS PTA-20, 2100, 2120
AX-820Y-02	2.1mm plug for Vivotek PTV-20
AX-820Y-03	1.3mm plug for Intelinet PTI-20
AX-820Y-04	No plug, bare wire for IVC 100
AX-820Y-05	Special connector for Symbol AP-41XX
AX-820Y-06	5.5mm barrel w/1.0mm center for Sony SNC-RZ30N, Sony PTS-20, AXIS 2130
AX-820Y-07	MAXI 7 pin socket for SAVI
AX-820Y-08	CONXALL 6 pin for SAVI SR-600-101
AX-820Y-09	1.0mm plug for AXIS 205, 210, 230, 241Q/S, 250S-206
AX-820Y-10	2.1mm plug on 8" power wire for symbol AP 3020 series
Single Port Models - Standard Modules - for Devices up to 15.4 watts, w/power supply
AX-8351	Single Power & Data port - 12 volt protocol
AX-8451	Single Power & Data port - 24 volt protocol
AX-8551	Single Power & Data port - IEEE 802.3af compatible
AX-8651	Single Power & Data port - Cisco CDP™ protocol
Single Port Models - High Wattage - for Devices up to 20 watts, with power supply
AX-8351HW	Single Power & Data port - 12 volt protocol
AX-8551HW	Single Power & Data port - IEEE 802.3af compatible
AX-8651HW	Single Power & Data port - Cisco CDP™ protocol
Power over Ethernet Connectors
AX-8858-01	PoE Connector allows a Cisco 7900 series IP phone or Access point* to take Power over Ethernet from an IEEE 802.3af style Ethernet switch or mid-span power injector.
AX-8858-02	PoE Connector allows a Cisco 7900 series IP phone or Access point* to take Power over Ethernet from an IEEE 802.3af style HP Pro Curve Ethernet switch.

* normally requiring Proprietary Cisco CDP Style PoE.